Articles: Cases/PSU
 

Bookmark and Share

(0) 
Pages: [ 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 ]

One of the most interesting engineering solutions this product embodies is to be found on the rear panel:

You don’t often see two 120mm fans on one rear panel! The top fan is intended to drive air to the radiator of a water-cooling system, but it is going to be helpful even if you use traditional air-based cooling. The doubling of the number of system fans allows to reduce the total noise, at the same time strengthening the airflows. This placement of the fans has one more advantage. A two-section water-cooling radiator – for example, the Black Ice Pro dual 120mm – mounts on them perfectly.

 

And this is one of the best radiators for water-cooling systems as confirmed by many PC enthusiasts.

Special holes were made for the pipes:

Recalling my experience with the Gigabyte 3D Galaxy water-cooling system, I have no doubts that its pipes are long enough for a proper deployment using these holes. The manufacturer must have tried to install a 3D Galaxy with the enclosed pipes in this system case and verified that there were enough room for all its components.

 
Pages: [ 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 ]

Discussion

Comments currently: 0

Add your Comment