Articles: Cases/PSU
 

Bookmark and Share

(12) 
Pages: [ 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 ]

Closer Look Inside

There’s enough space inside to accommodate a full-size ATX mainboard. The two large fans seem to be in the right place, too.

The accessories to the system case are all parceled into a black plastic box which you will find in the 3.5” rack.

The contents are less numerous than the appearance of the box seems to promise.

So, you get a set of hard drive rails, SATA power adapters, fasteners, keys, cable holders that you can stick anywhere in the case, and a special bracket for the front panel (I’ll tell you its purpose shortly).

All the cables are neatly gathered in a single braid:

The wires from the exhaust fans are placed properly, too:

The fans share a single power cable and are attached to a standard connector on the mainboard. Thus, you can use the mainboard’s speed-control functions, if necessary.

 
Pages: [ 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 ]

Discussion

Comments currently: 12
Discussion started: 12/15/15 07:55:38 PM
Latest comment: 12/21/15 11:43:01 AM

View comments

Add your Comment