Articles: Cases/PSU
 

Bookmark and Share

(0) 
Pages: [ 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 ]

Assembly Tips and Tricks

Judging by the bruised looks of our TNN500A, it came to our test lab after a series of long and difficult trials, also having been used as a bobsled at the last Olympics. However, those people who performed those tests were not smart enough to slap some thermal paste on the places where the heat pipes are fastened to the side panels, as the instruction and common sense both suggest. So, I first had to unscrew the fastenings of the heat pipes and apply some paste:

Before installing the pipes back, I put some thermal paste into the grooves of the fastenings, too:

Having installed the mainboard, CPU and the CPU cooling system, you can proceed to installing the graphics card. I used an inexpensive graphics card from ASUS based on the NVIDIA GeForce FX 5200 GPU:

First, you remove the standard cooling system altogether and replace it with the GPU unit:

 
Pages: [ 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 ]

Discussion

Comments currently: 0

Add your Comment