Articles: Cases/PSU
 

Bookmark and Share

(0) 
Pages: [ 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 ]

Assembly

Although the Zalman TNN500AF came to us without any guides or manuals, I had no problems putting it together. Everything is very logical and intuitive – you can hardly make anything wrong.

So, you can start by installing your hard disks and optical drives onto the side panel of the case.

To do that, you should loosen the fastenings of the ledges on the side panel and remove these ledges. Purchasing a TNN500AF you receive the necessary fasteners for the drives…

…and a special shielded IDE cable:

Unfortunately, there was only one such cable, while the system can accommodate at least five IDE devices.

 
Pages: [ 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 ]

Discussion

Comments currently: 0

Add your Comment