The radiator has a design and size similar to the radiator of Gigabyte’s 3D Galaxy.

The configuration of the fittings and the way the water flows through the radiator are different from Gigabyte’s radiator, but these are not very important factors. The design of the pump, on the contrary, is quite strange:

The tiny pump is combined with the CPU water-block. The sole is polished very well:

It’s a good fact, considering that the kit comes with fasteners for the Socket A platform.

The installation procedure is quite simple. You choose the necessary fastening plate and screw it to the bottom of the pump:

Then you insert more screws and everything is ready for installation: