You can attach four suction cups on the stand if necessary:

The intake opening of the reservoir is located right between the pump’s fittings:

As a result, the attached pipes may get in your way as you are trying to fill up the system after assembly.

The rear panel of the pump is what draws our attention:

Besides a power connector, there are connectors for two fans and a USB cable at the bottom. At the top of the panel there is a big connector for an LCD display (which is not included into our sample of the kit) and a group of connectors for thermal sensors and a system operation indicator.

The water-block should be familiar to all loyal users of Asetek’s products. It is the 03-L-2010 model with LGA775 fastening:

This is an excellent and time-tested design few other products can challenge in terms of performance. The base of the water-block suits all the existing platforms, but the cap is to be ordered separately for each particular platform. The fasteners are easy to work with:

You don’t need any screwdrivers. The system is assembled in a few minutes and with no problems at all. The kit also includes a USB cable, two thermo-sensors, a splitter for the water-block pipes, two stickers to fix down some elements of the system, and a syringe with special liquid you are recommended to add into the water.