The fan is made by Cooler Master in China and marked as А9025-25RB-4AP-F1. It consumes about 4.8 watts at a current of 0.4 amperes.

The transparent carcass of the fan and its “chromium-plated” blades just call for LED-based highlighting, but this model lacks it, unfortunately.

A piece of polyethylene film protects the base against scratches.

The standard warning on this film (that you should remove it prior to installing the cooler), doesn’t always work with certain users, but anyway. The cooler’s base is flat under the film, but is not finished. You can even feel the traces of the milling machine with your fingers.

A small box in the bottom of the package includes the following accessories:

• Back-plate to install the cooler on Socket T (LGA775)
• Two plates to install the cooler on Socket (LGA775)
• Two plates to install the cooler on Socket 754, 939, 940 and AM2
• Four plastic spacers
• Rubber circles with one adhesive side
• Four nuts and a spanner for them
• Screws to fasten the plates
• Cooler Master’s thermal paste

There is no installation manual with our sample of the Hyper 7, but it’s only because it is a pre-release version of the product. You will surely get a manual with a serial sample of the cooler.