EK-DCP 4.0 Pump and Retention Kit
The third component in the EK-Supremacy KIT H3O HFX liquid-cooling kit is the EK-DCP 4.0 pomp. It is also packed into an individual cardboard box:
It comes with a power cable, two plastic retention stands, double-sided sticky tape and pump installation and operation manual:
EK-DCP 4.0 is the most powerful pump from EKWB. Its performance is declared to be 800 l/h and the head (the number of meters the pump can raise the column of water at atmospheric pressure) – at 4 m. It looks like a simple plastic box 75x54x66 mm in size, which weighs 670 grams and has two threaded nozzles for fittings:
A small sticker with the pump marking indicates that its voltage is 12 V and current - 1.8 A:
As for other known characteristics of this pump, we should definitely mention the maximum noise level of 24.5 dBA and the 50,000 hours MTBF of the ceramic bearing. If purchased separately, this pump will cost you € 44.95.
Besides the pump, the EK-Supremacy KIT H3O HFX liquid-cooling kit also includes EK-DCP mounting plate KIT:
This kit consists of two thick but soft pads, a steel mounting plate, screws and installation instructions:
You should use this kit to install the pump anywhere you want. The shock-absorbing pads will lower the noise substantially.