Articles: Cooling
 

Bookmark and Share

(1) 
Pages: [ 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 ]

EK-Multioption RES X2 – 150 Basic Reservoir

Finally, the last individual component in the EK-Supremacy KIT H3O HFX system is the EK-Multioption RES X2 – 150 Basic expansion tank (reservoir):

 

It comes with the retention, screws and plug-panels and an installation manual:

The cylindrical reservoir is 150 mm high, 60 mm in diameter and weighs 270 g. It is made of thick acrylic and has two plastic caps at the top and bottom:

There is one threaded hole in the top cap for the fitting, and three holes in the bottom cap, two of which are located directly at the base of the reservoir:

 

Besides, there is an additional tube 16 mm in diameter inside the reservoir, which serves as a sort of an anti-cyclone and prevents air bubbles from forming in the coolant. The installation procedure for the reservoir is described in detail in the enclosed instruction manual. EK-Multioption RES X2 – 150 Basic reservoir may also be purchased separately, in which case it will cost you € 32.95.

 
Pages: [ 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 ]

Discussion

Comments currently: 1
Discussion started: 06/22/13 12:58:30 PM
Latest comment: 06/22/13 12:58:31 PM

View comments

Add your Comment