Package and Accessories

The cooler comes in a small cardboard box with a plastic carry handle:

The small window in the front side gives you a view of the top part of the cooler and of the ends of the heat pipes. On the back side you can see a chart that shows how air flows through the cooler’s heatsink. The key product features are also listed there. A detailed cooler specification is printed on a side panel:

The box is identical for both versions of the cooler. The model contained within is indicated by the red circle in the appropriate specification column.

Inside the package you will find a small box with accessories and a Titan Amanda TEC cooler, in a special plastic envelope that keeps the cooler fixed firmly in place.

Before examining the cooler, let’s take a look at the accessories supplied with it:

• Installation and connection guide
• Soft-padded back-plate
• Four screws to fasten the cooler
• Titan TTG-G30010 thermal grease
• Screened cable to connect the Peltier element to the PCI controller
• Power cable
• Two cords to hang the cooler up inside the system case

Here is the controller card that is to be installed into your mainboard’s PCI slot:

The card is very small at 136x121x21mm and will easily fit into any system case. You have to put up with losing one PCI slot although new mainboards don’t have too many of them.