Search<%BANNER[left_130x130_1]%>
<%BANNER[left_130x300]%>
<%BANNER[left_130x130_2]%>
InformationX-bit Labs for mobile users! Do not forget that we are running a special version of X-bit Labs web-site for users of mobile and handheld devices: http://pda.xbitlabs.com. Check out our news and articles from smartphones and PDAs to be always updated on the latest computer and technology news. <%BANNER[right_130x600]%>
|
<%BANNER[top_768x90]%>
|
|
|
<%BANNER[banner_468x60]%>
Articles: Editorial
CeBIT 2007 Coverage: Part 3Category: Editorial by Anton Shilov [ 03/21/2007 | 05:45 AM ] Today we are visiting booths of Corsair to have a look at unique 1111MHz 4GB memory kit and the company’s new flash sticks that are bullet-proof at least, we also check out a water-cooler for ATI R600 graphics card from Thermaltake, meet MSI’s mainboard with Creative X-Fi onboard, take a look at sound cards from Asus as well as glance at the world’s largest televisions with 108” and 205” diagonal size. Table of contents:
I Need Speed: Corsair Offers 4GB Memory Kit at 1111MHzIt’s not a secret that memory volume of a personal computer (PC) affects end-user’s productivity much more than any other component of the computer, as it is pretty difficult to keep attention on the working process while operating system loads data from HDD most of the time stopping your workflow. But there are situations when performance of memory itself is also critical, for instance, in games.
Unfortunately, there is always a trade-off between the volume of memory and its clock-speed, as high-capacity chips as well as large numbers of chips are harder to set up working at a high clock-speed. But Corsair Memory has managed to find a way out and is gearing up to unveil 1111MHz 4GB memory kit that consists of two 2GB memory modules.
Despite of pretty high frequency and capacity, the modules can function at 1066MHz with CL4 4-4-12 latency settings at 2.5V (they are labeled as PC2-8888, or 1111MHz, but the company has not provided latency settings for that clock-speed).
The solution still requires active cooling, which adds noise, but the fans for Dominator memory modules are not very loud, so there should hardly be any complains about the noise levels. <%BANNER[banner_468x30]%>
|
<%BANNER[right_130x130_1]%>
|
|
<%BANNER[foot_728x90]%> | ||

