Articles: Mainboards
 

Bookmark and Share

(3) 
Pages: [ 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 ]

The “CPU Configuration” sub-section reports the basic info about the processor and allows managing some processor technologies.

All parameters related to power-saving are singled out on a separate page called “CPU Power Management Configuration”.

“Monitor” section tells us the current temperatures, voltages and fan rotation speeds. You can select one of the preset modes for the processor and two case fans from a pretty standard list including “Standard”, “Silent” and “Turbo” modes. You can also select the parameters manually. Both case fan connectors allow adjusting the fans rotation speeds even if you are using three-pin fans, unlike the processor fan connector. And the three-pin “Power Fan” connector doesn’t support any rotation speed adjustment at all and only reports the RPM of the fan connected to it.

The “Boot” section allows you to adjust your boot-up parameters that will be applied on system start-up. By the way, this is where you have to replace the default “EZ Mode” with “Advanced Mode”.

Now let’s quickly refresh the functionality of the “Tools” section.

The built-in “EZ Flash 2” utility for BIOS reflashing is one of the most convenient and functional programs of the kind. Unfortunately, they have recently eliminated the option that allowed saving the current BIOS version before reflashing a new one.

Asus mainboards allow saving and then quickly loading eight full BIOS settings profiles. Each profile may be given a brief descriptive name reminding you of its contents. They still haven’t fixed the issue that doesn’t allow you to save disabling of the startup image in the settings profile, but they brought back the ability to exchange BIOS settings profiles with other users, which was lost upon transition to the EFI BIOS. From now on the profiles may be saved onto external media and loaded from them.

Just like on mainboards from many other makers we can read the information in the memory modules SPD.

The last section is called “Exit”. Here you can apply the changes, restore the defaults or go back to the “EZ Mode”.

 

 
Pages: [ 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 ]

Discussion

Comments currently: 3
Discussion started: 10/04/12 06:59:13 PM
Latest comment: 10/05/12 02:44:32 PM

View comments

Add your Comment