Articles: Mainboards
 

Bookmark and Share

(5) 
Pages: [ 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 ]

Memory Timing Config page allows adjusting numerous memory timings. Note how convenient it is, when you can change just a few selected parameters and leave all other settings at defaults.

All voltages that can be adjusted on Foxconn Mars mainboard are brought together in All Voltage Control page. I don’t really understand why we need two parameters for processor voltage adjustment, but anyway, if you set the Vcore to 1.375V with 1.036 multiplier you will not need to use a calculator to find out the final voltage value. Target CPU Voltage will show you the final voltage sent to the processor, while the Current CPU Voltage will report the current Vcore value and the Default CPU Voltage – the nominal value.

The complete list of options available on the All Voltage Control page is listed in a table below taken from the official company web-site. Note that the board allows not only increasing the processor voltage above the nominal value, but also reducing it, which may be necessary at times, although not all the mainboards allow it.

OverClocks Gear page allows to save and restore when necessary one of the four BIOS Setup profiles.

The only problem here is that you can’t give the profiles an adequate name or description, so that you could remember what it is about later on. However, for your convenience the active profiles are highlighted with a different color.

 
Pages: [ 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 ]

Discussion

Comments currently: 5
Discussion started: 11/13/07 09:00:56 AM
Latest comment: 03/16/08 05:39:34 AM

View comments

Add your Comment