However, the actual work with the profiles is absolutely problem-free. The date and time of the profile creation as well as the BIOS version it belongs to are saved automatically for each profile. You can assign each profile a memorable descriptive name, or erase a profile from memory if necessary.
The next two sub-sections called “CPU Specifications” and “Memory-Z” perform purely informational functions. The first one tells us all the basic info about our CPU:
You can dig deeper, if you like, and check out the lost of supported processor technologies.
The “Memory-Z” sub-section is organized in a similar manner. The first thing you see, if the information recorded in the memory modules SPD. The mainboard will use these particular settings by default.
However, the actual potential of the memory modules can only be found in the “X.M.P.” profile, which you can also access through here.
In the “CPU Features” sub-section we can configure processor clock frequency multipliers, acceptable power consumption range and various processor technologies. This very important sub-section for some reason was the last in the list, but it is still very easy to access it, because all parameters in the “OC” section are looped. You don’t have to keep pressing the “down” key endless number of times to get the last sub-sections or settings. Just press the “up” key once and you will get there in no time.
“ECO” section is what used to be “Green Power” before. Here we can work with some power-saving parameters and can control the current values of the most important voltages in the system.
“Browser” icon on the right-hand side will let you browse the Internet, check your e-mail, use some office or IM apps, but only if you have previously installed Winki 3 Linux-based operating system from the included DVD disk. The same is true for HDD Backup and Live Update utilities, which are hidden behind the “Utilities” icon.
In the “M-Flash” sub-section we can try and boot using a BIOS image on the flash-drive, can save the current BIOS version or update it. It is somewhat inconvenient that the images are not only saved in the drive root folder, they should also be there for a successful update. There is no file manager of any sort, the NTFS file system is not supported, and the flash drive must be formatted as FAT or FAT32.
In the “Security” section you will be able to set passwords for system access, which is what other boards also allow. There is an interesting MSI’s own proprietary feature that will let you make a common flash drive into an access key.
Overall, MSI Click BIOS II looks very easy to work with and illustrative. Our biggest concern here is very low brightness of the font, which is used for informational parameters. Check out the previous image, as an example: you can barely see the first three lines of text and they are very hard to read. A year ago we mentioned that since the new Micro-Star BIOS interface had just come out, there was hope that as time went on, it would improve. However, it hasn’t undergone any significant changes over this past year.