In our previous MSI mainboard reviews we have already discussed MSI Click BIOS II, which represents a pretty successful implementation of the UEFI (Unified Extensible Firmware Interface) standard. The top of the screen performs not only informational functions but also allows choosing interface language, changing the order of boot-up devices by simply dragging and dropping them with a mouse pointer. The currently active devices will be highlighted.
The center of the screen is allocated for displaying the BIOS settings, with main section icons on the -left and right-hand sides. Let’s get to the first section called “Settings”, which also contains a few sub-sections.
“System Status” sub-section is, in fact, the same startup screen, which we saw when we entered the regular traditional BIOS. It reports the major system info.
The variety of settings in the “Advanced” section is of no surprise to us, as they have migrated from the regular BIOS almost without any modifications.
Now let’s check out the “Hardware Monitor” section where you can enable automatic adjustment of the CPU fan rotation speed depending on the current processor temperature. The adjustment works only for four-pin fans. All three-pin fans will rotate at their full speed. However, if you connect a three-pin fan to one of the two four-pin system fan connectors, its rotation speed will be lowered as needed. The rotation speed adjustment for these two fan connectors may be left at Auto or set at a specific level. The rotation speed of the remaining two three-pin system fans cannot be adjusted or even controlled.
“Boot” sub-section will allow you to set the boot-up devices order and a number of other things used during system startup.
The functionality of the “Save & Exit” sub-section is obvious and doesn’t need an explanation.
“OC” section is one of the largest in terms of available settings. It contains almost all options necessary for successful configuring and overclocking. It also has a number of informational parameters that report the current system status.
You can use “Enhanced Turbo” BIOS parameter if you want to slightly overclock the processor and at the same time keep all processor power-saving technologies up and running. When this function is on, under any type of load the processor clock frequency multiplier will rise to the maximum for this specific processor model as allowed by Intel Turbo Boost. If you want to achieve even higher results, you should use OC Genie II function that allows overclocking the system by selecting a proper option in the mainboard BIOS or by pressing the OC Genie button. Any automatic overclocking technology has a number of shortcomings, which could be partially smoothed out during user fine-tuning. “My OC Genie” parameter allows setting some of the parameters to desired values, which will be used during overclocking with the “OC Genie II” function.
In order to make it easier to work in this feature-rich section, some parameters have been moved to individual pages. Namely, the memory timings have all been isolated in an individual sub-section. They may be identical for all memory channels, or set individually for each of them.