Upgrade

Let?s first take a look at the bottom panel of the notebook.

Unscrew two screws and you can get to the hard disk drive, unscrew two more ? you reach the processor and memory. The HDD bay has rubber padding for protecting the device from sudden bumps and hits. This is a nice trifle that I have never seen before.

All main vent holes for cooling the notebook are in its bottom panel. That?s why make sure that you don?t place the device on anything soft ? this may cause grave overheating of the interior.

ABS Zensation Z3 allows replacing the processor and hard disk drive as well as increasing the memory amount.

The CPU and the cooling system:

The CPU cooling system of ABS Zensation Z3 is based on heat pipes technology. Also, due to the SpeedStep technology, which is actively employed by the notebook, the CPU core clock frequency is reduced to 600MHz and the fan of the cooling system is used on very rare occasions.

The hard disk drive:

The memory slot:

The platform contains two SO-DIMM slots, so you can easily increase the memory amount by inserting another module into the empty slot.