The first page in the Maintenance group is Admin Password. You can enter a new administrator password here.
The System page is where you can back up and reset the NAS’s settings, reboot and shut it down, and specify the time-out for the device to exit the Setup Manager if the user is inactive.
The firmware is updated on the Firmware Upgrade page.
On the Email Alerts page you can specify a sender’s account and an email address for sending notifications about NAS-related events which are selected here, too.
On the Power Management page the time-out for the HDD to enter sleep mode is specified.
Disk formatting and scanning tools can be started on the Format Disk and Scan Disk pages, respectively.
On the Dynamic DNS page the parameters of a DDNS account can be entered for assigning a domain name to devices with dynamic IP addresses.