Articles: Networking
 

Bookmark and Share

(0) 
Pages: [ 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 ]

System Tools

The System Tools group contains some additional features of the NAS. You can do without them all right, but it is good just to have such options. The Alert Notification page goes first in this group. You can specify two addresses email notifications about failures in the NAS’s operation will be sent to.

The Restart/Shutdown page allows you to reboot or shut down the TS-109Pro II with a click of a button.

The Hardware Settings page is where you can specify the NAS’s behavior in case of a power failure, errors, etc.

If you connect a compatible UPS to the TS-109Pro II, you can specify its parameters on the UPS page.

You can view detailed information about the attached HDD on the Hard Disk SMART page. You can also test the HDD here.

The NAS’s firmware can be updated on the System Update page.

The USB one touch copy backup page is for choosing the parameters of the appropriate feature.

An interesting feature can be found on the Change Logo page. You can load up to four small pictures to be displayed in a small fragment of the web-interface’s title page.

 
Pages: [ 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 ]

Discussion

Comments currently: 0

Add your Comment