Articles: Networking
 

Bookmark and Share

(0) 
Pages: [ 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 ]

System Group

The next group is called System and contains settings related to the NAS proper. It begins with the Network page where you can specify the parameters of the Ethernet port and change the network name of the DS207+.

The Language page is for choosing the language of the NAT’s web-interface, e-mail notifications and codepage for filenames.

VPN connection parameters are specified on the PPPoE Setting page.

The system date and time of the NAS device are configured on the Time page. Parameters of the NTP protocol are specified here, too.

The way to notify the administrator about errors is specified on the Notification page. You enter the parameters of an external SMTP server and the recipient’s email here.

The power-saving mode of the DS207+ is configured on the Power page. Particularly, you can specify the idle period after which the HDDs will be shut down.

To restore the settings to their defaults and/or format the internal HDD you should go to the Restore Defaults page.

The second group of settings ends with the Firmware Update page. Here you can update the firmware and install patches that would add to the functionality of the already installed firmware.

 
Pages: [ 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 ]

Discussion

Comments currently: 0

Add your Comment