Articles: Networking
 

Bookmark and Share

(0) 
Pages: [ 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 ]

Status and Quick Setup Sections

The list begins with the Status page that shows brief information for each of the router’s key sections: LAN, WAN, WLAN.

Next goes the Quick Setup page you can use to set up the router’s main parameters in a step by step manner. I found one flaw here: the appropriate step offers only three out of eight possible WAN connection variants.

The router’s local address and its subnet mask are specified on the LAN page.

The WAN page is where you set up your WAN connection parameters. You should first select the necessary connection method from the list and then specify the required parameters.

A MAC address may be specified on the MAC Clone page the router will be visible from the external network by. It may be useful if the ISP strictly binds the IP address to the client’s MAC address.

Key parameters of the wireless connection like SSID, channel number, connection standard, encryption method, etc. are set up on the Wireless Settings page.

On the MAC Filtering page you can create a list of MAC addresses that are prohibited/allowed to access the router.

 
Pages: [ 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 ]

Discussion

Comments currently: 0

Add your Comment