Articles: Networking
 

Bookmark and Share

(0) 
Pages: [ 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 ]

MAC address based filtering can be set up on the MAC Address Filter page.

The router’s SPI firewall settings can be found on the Firewall Settings page. DMZ mode settings, which are usually found in a separate menu screen, are placed here, too.

The Inbound Filter page is for writing rules to filter external incoming connections by IP addresses.

You can fine-tune the router’s WLAN settings on the Advanced Wireless page. You shouldn’t tinker with these parameters if the connection is established normally.

Wired connection parameters that didn’t fit into any of the previous groups can be found all together on the Advanced Network page.

The WISH page is where you can specify your WLAN traffic priorities.

The last page in the Advanced group is called Wi-Fi Protected Setup. You can automatically send WLAN connection settings to any device that supports with mode by means of a special PIN code.

 
Pages: [ 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 ]

Discussion

Comments currently: 0

Add your Comment