by Anton Shilov
12/18/2012 | 11:08 PM
By using electric voltage instead of a flowing electric current, researchers from UCLA have made major improvements to an ultra-fast, high-capacity class of computer memory known as magnetoresistive random access memory, or MRAM. The UCLA team's improved MRAM has great potential to be used in future memory chips for almost all electronic applications.
MeRAM's key advantage over existing technologies is that it combines extraordinary low energy with very high density, high-speed reading and writing times, and non-volatility. Currently, magnetic memory is based on a technology called spin-transfer torque (STT), which uses the magnetic property of electrons – referred to as spin – in addition to their charge. STT utilizes an electric current to move electrons to write data into the memory.
Yet while STT is superior in many respects to competing memory technologies, its electric current–based write mechanism still requires a certain amount of power, which means that it generates heat when data is written into it. In addition, its memory capacity is limited by how close to each other bits of data can be physically placed, a process which itself is limited by the currents required to write information. The low bit capacity, in turn, translates into a relatively large cost per bit, limiting STT's range of applications.
With MeRAM, the UCLA team has replaced STT's electric current with voltage to write data into the memory. This eliminates the need to move large numbers of electrons through wires and instead uses voltage – the difference in electrical potential – to switch the magnetic bits and write information into the memory. This has resulted in computer memory that generates much less heat, making it 10 to 1000 times more energy-efficient. The memory can be more than five-times as dense, with more bits of information stored in the same physical area, which also brings down the cost per bit.
“The ability to switch nanoscale magnets using voltages is an exciting and fast-growing area of research in magnetism. This work presents new insights into questions such as how to control the switching direction using voltage pulses, how to ensure that devices will work without needing external magnetic fields, and how to integrate them into high-density memory arrays. […] MeRAM's advantage over competing technologies will not be limited to its lower power dissipation, but equally importantly, it may allow for extremely dense MRAM,” said Pedram Khalili, a research associate in electrical engineering and project manager for the UCLA–DARPA research programs in non-volatile logic.
MeRAM uses nanoscale structures called voltage-controlled magnet-insulator junctions, which have several layers stacked on top of each other, including two composed of magnetic materials. However, while one layer's magnetic direction is fixed, the other can be manipulated via an electric field. The devices are specially designed to be sensitive to electric fields. When the electric field is applied, it results in voltage — a difference in electric potential between the two magnetic layers. This voltage accumulates or depletes the electrons at the surface of these layers, writing bits of information into the memory.
"Ultra-low–power spintronic devices such as this one have potential implications beyond the memory industry. They can enable new instant-on electronic systems, where memory is integrated with logic and computing, thereby completely eliminating standby power and greatly enhancing their functionality," said Kang L. Wang, UCLA's Raytheon professor of electrical engineering.