News
 

Bookmark and Share

(0) 

A new specification for the popular Serial ATA storage interface will double the maximum transfer speed from 3Gb/s to 6Gb/s. This will provide an interface with data rate that will be enough to feed the forthcoming hard disk drives (HDDs) and solid state drives (SSDs).

“By doubling transfer speeds while maintaining backward compatibility, the new specification will make Serial ATA an even more attractive solution for consumers and businesses alike,” said Knut Grimsrud, SATA-IO president and Intel Fellow.

Serial ATA International Organization (SATA-IO), the consortium dedicated to sustaining the quality, integrity and dissemination of SATA technology, today released to its members the physical layer (PHY) portion for its third generation storage interface, which will be defined in the upcoming SATA Revision 3.0 specification. Today’s release ushers in a new generation of faster SATA 6Gb/s products. Developers can now begin designing products based on SATA 6Gb/s technology as work continues on the SATA Revision 3.0 specification, which is expected to be completed in the second half of 2008.

“SATA has become the primary storage interface with more than 650 million SATA hard disk drives shipped since its introduction in 2001. He added that more than three-quarters of new desktop and mobile PC systems shipped in 2007 were equipped with SATA hard drives. Other devices adopting the SATA interface technology include optical disk drives, solid state drives and multi-user storage applications. Many entry and mid-level servers as well as external storage systems now feature the technology,” said John Rydning, IDC’s research director for hard disk drives.

Various SATA-IO work groups are engaged in the process of readying new features for incorporation in the final version of the SATA Revision 3.0 specification. These features will include advances for data streaming and better power management.

The new specification will maintain the low cost and low power for which the popular storage interface is acclaimed. In addition, backward compatibility with earlier SATA implementations will be maintained by keeping the existing SATA connector configuration, preserving its inherent cost-conscious design while minimizing changes to existing implementations and infrastructures. The same cables and connectors used for current SATA implementations can be used to connect SATA 6Gb/s devices, although SATA-IO recommends utilizing quality components to ensure data integrity and robust operation at the fast 6Gb/s transfer rate.

SATA-IO will demonstrate implementations of its new 6Gb/s technology at the Intel Developer Forum (IDF) this week. In addition to 6Gb/s technology and other product demonstrations, the organization will host a daily raffle.

Discussion

Comments currently: 0

Add your Comment




Related news

Latest News

Monday, July 21, 2014

12:56 pm | Microsoft to Fire 18,000 Employees to Boost Efficiency. Microsoft to Perform Massive Job Cut Ever Following Acquisition of Nokia

Tuesday, July 15, 2014

6:11 am | Apple Teams Up with IBM to Make iPhone and iPad Ultimate Tools for Businesses and Enterprises. IBM to Sell Business-Optimized iPhone and iPad Devices

Monday, July 14, 2014

6:01 am | IBM to Invest $3 Billion In Research of Next-Gen Chips, Process Technologies. IBM to Fund Development of 7nm and Below Process Technologies, Help to Create Post-Silicon Future

5:58 am | Intel Postpones Launch of High-End “Broadwell-K” Processors to July – September, 2015. High-End Core i “Broadwell” Processors Scheduled to Arrive in Q3 2015

5:50 am | Intel Delays Introduction of Core M “Broadwell” Processors Further. Low-Power Broadwell Chips Due in Late 2014