News
 

Bookmark and Share

(8) 

Seagate Technology has become the first hard drive maker to achieve the milestone storage density of 1Tb per square inch, producing a demonstration of the technology that promises to double the storage capacity of today’s hard drives upon its introduction later this decade and give rise to 3.5” hard drives with capacity of up to 60TB over the 10 years that follow.

Seagate reached the landmark data density with heat-assisted magnetic recording (HAMR), the next- generation recording technology. The current hard drive technology, perpendicular magnetic recording (PMR), is used to record the spectrum of digitized data – from music, photos, and video stored on home desktop and laptop PCs to business information housed in sprawling data centers – on the spinning platters inside every hard drive. PMR technology was introduced in 2006 to replace longitudinal recording, a method in place since the advent of hard drives for computer storage in 1956, and is expected to reach its capacity limit near 1Tb per square inch in the next few years.

“The growth of social media, search engines, cloud computing, rich media and other data-hungry applications continues to stoke demand for ever greater storage capacity. Hard disk drive innovations like HAMR will be a key enabler of the development of even more data-intense applications in the future, extending the ways businesses and consumers worldwide use, manage and store digital content,” said Mark Re, senior vice president of heads and media research and development at Seagate.

Hard drive manufacturers increase areal density and capacity by shrinking a platter’s data bits to pack more within each square inch of disk space. They also tighten the data tracks, the concentric circles on the disk’s surface that anchor the bits. The key to areal density gains is to do both without disruptions to the bits’ magnetization, a phenomenon that can garble data. Using HAMR technology, Seagate has achieved a linear bit density of about 2Mb per inch, once thought impossible, resulting in a data density of just over 1Tb per square inch – 55% higher than today’s areal density ceiling of 620Gb per square inch.

The maximum capacity of today’s 3.5” hard drives is 3TB, at about 620Gb per square inch, while 2.5” drives top out at 750GB, or roughly 500Gb per square inch. The first generation of HAMR drives, at just over 1 terabit per square inch, will likely more than double these capacities – to 6TB for 3.5” drives and 2TB for 2.5” models. The technology offers a scale of capacity growth never before possible, with a theoretical areal density limit ranging from 5 to 10Tb per square inch – 30TB to 60TB for 3.5” drives and 10TB to 20TB for 2.5” drives.

Tags: Seagate, HDD

Discussion

Comments currently: 8
Discussion started: 03/19/12 04:43:53 PM
Latest comment: 03/20/12 10:46:53 PM
Expand all threads | Collapse all threads

[1-4]

1. 
60 TB. If I'm not mistaken, today's motherboards have support for those hard drives.

Filesystems, of course yes, since a long time.
0 0 [Posted by: Filiprino  | Date: 03/19/12 04:43:53 PM]
Reply
- collapse thread

 
"...later this decade and give rise to 3.5” hard drives with capacity of up to 60TB over the 10 years that follow."

Exciting stuff. We'll need 60TB drives in 10 years if content goes up 4-8x in resolution (4K to 8K TVs).

In the last 2-3 years we've stagnated though. I can't believe 4TB drives aren't even readily available yet, and definitely not affordable.
0 0 [Posted by: BestJinjo  | Date: 03/19/12 07:35:07 PM]
Reply
 
Seagate has had an external 4TB drive out for at least 4 months, for about $250. That's affordable for a lot of people, and actually *relatively* cheap.
0 0 [Posted by: Papoulka  | Date: 03/20/12 10:46:53 PM]
Reply

2. 
I remember the day when my roommate bought his first 1GB Western Digital HDD back in 1996, or so. We were holding that piece of marvel in awe. Now we have 3TB HDD, that is 3,000 times larger. Who would have thought that is possible.
2 0 [Posted by: gamoniac  | Date: 03/19/12 07:34:15 PM]
Reply
- collapse thread

 
I remember it took my Pentium II 233mhz MMX 2 min 45 seconds to load ICQ. I used to have time to go downstairs, make a coffee, and it would still be loading. I think I had Savage S3 (S4?) videocard with 4MB of VRAM.

Pong used to be revolutionary and Prince of Persia and Golden Axe...that was like Crysis.
1 0 [Posted by: BestJinjo  | Date: 03/19/12 07:37:15 PM]
Reply
 
That's exactly how I felt with my first 70 Kilobyte floppy drive - in 1978. Like wow, man!
1 0 [Posted by: Papoulka  | Date: 03/20/12 10:41:42 PM]
Reply

3. 
And 60TB SSD will be out by 2030 and will be affordbable by 2040 lol.
0 1 [Posted by: SteelCity1981  | Date: 03/19/12 07:50:13 PM]
Reply

4. 
Didn't they hear about Megaupload?
0 0 [Posted by: Papoulka  | Date: 03/20/12 10:38:04 PM]
Reply

[1-4]

Add your Comment




Related news

Latest News

Tuesday, July 22, 2014

10:40 pm | ARM Preps Second-Generation “Artemis” and “Maya” 64-Bit ARMv8-A Offerings. ARM Readies 64-Bit Cores for Non-Traditional Applications

7:38 pm | AMD Vows to Introduce 20nm Products Next Year. AMD’s 20nm APUs, GPUs and Embedded Chips to Arrive in 2015

4:08 am | Microsoft to Unify All Windows Operating Systems for Client PCs. One Windows OS will Power PCs, Tablets and Smartphones

Monday, July 21, 2014

10:32 pm | PQI Debuts Flash Drive with Lightning and USB Connectors. PQI Offers Easy Way to Boost iPhone or iPad Storage

10:08 pm | Japan Display Begins to Mass Produce IPS-NEO Displays. JDI Begins to Mass Produce Rival for AMOLED Panels

12:56 pm | Microsoft to Fire 18,000 Employees to Boost Efficiency. Microsoft to Perform Massive Job Cut Ever Following Acquisition of Nokia